PureNipto Salt Cleaner 1L

Instructions for Use:

1. Preparation:
2. • Ensure the coffee machine is turned off and cooled down before starting the descaling process.
3. Mixing the Descaling Solution:
4. • Refer to the product label for the recommended dilution ratio. Typically, mix 50ml of PureNipto Salt Cleaner Liquid per 1L of water.
   • Pour the diluted solution into the machine's water reservoir.
5. Descaling Process:
6. • Turn on the machine and initiate a brew cycle without coffee grounds, allowing the solution to pass through the system.
   • Collect the dispensed solution in a container and repeat the process until the reservoir is empty.
   • For machines with a steam wand, run the solution through the wand to descale internal components.
7. Rinsing:
8. • After descaling, thoroughly rinse the water reservoir to remove any residual solution.
   • Fill the reservoir with fresh, clean water.
   • Run multiple brew cycles with clean water to flush out any remaining descaling solution from the system.
   • Ensure the steam wand is also flushed with clean water if it was used during the descaling process.

Additional Tips:

• Frequency of Descaling: The frequency depends on the hardness of your water and machine usage. Regular descaling is recommended to maintain optimal performance.
• Safety Precautions: Always handle cleaning agents with care. Avoid contact with skin and eyes, and keep out of reach of children. Use in a well-ventilated area.
• Storage: Store PureNipto Salt Cleaner Liquid in a cool, dry place, away from direct sunlight and food products.